Berserker Spirit

[XxXTenTaCioN]

Olá pessoal, eu quero editar o buff Berserker Spirit onde eu edito para abaixar mais o p.def e o m.def?

Citar

<skill id="1062" levels="2" name="Berserker Spirit" enchantLevels1="30" enchantLevels2="30">
  <table name="#enchantMagicLvl">76 76 76 77 77 77 78 78 78 79 79 79 80 80 80 81 81 81 82 82 82 82 83 83 83 84 84 85 85 85</table>
  <enchant1 name="magicLvl" val="#enchantMagicLvl"/>
  <enchant2 name="magicLvl" val="#enchantMagicLvl"/>
  <table name="#ench2MpConsume">37 36 36 35 34 34 33 32 32 31 31 30 29 29 28 27 27 26 25 25 24 24 23 22 22 21 20 20 19 19</table>
  <table name="#ench2MpConsume_Init">9 9 9 9 9 9 8 8 8 8 8 8 7 7 7 7 7 7 6 6 6 6 6 6 5 5 5 5 5 5</table>
  <table name="#ench1time">
  1240 1280 1320 1360 1400 1440 1480 1520 1560 1600
  1640 1680 1720 1760 1800 1840 1880 1920 1960 2000
  2040 2080 2120 2160 2200 2240 2280 2320 2360 2400
  </table>
  <table name="#mAtk">1.1 1.16</table>
  <table name="#val">1.05 1.08</table>
  <table name="#mDef">0.8 0.80</table>
  <table name="#pDef">0.90 0.90</table>
  <table name="#runSpd">5 8</table>
  <table name="#rEvas">2 4</table>
  <table name="#mpConsume_Init">6 10</table>
  <table name="#mpConsume">24 38</table>
  <table name="#aggro">331 495</table>
  <set name="mpInitialConsume" val="#mpConsume_Init"/>
  <set name="mpConsume" val="#mpConsume"/>
  <set name="target" val="TARGET_PARTY_MEMBER"/>
  <set name="reuseDelay" val="6000"/>
  <set name="hitTime" val="4000"/>
  <set name="skillType" val="BUFF"/>
  <set name="isMagic" val="true"/>
  <set name="operateType" val="OP_ACTIVE"/>
  <set name="castRange" val="400"/>
  <set name="effectRange" val="900"/>
  <set name="aggroPoints" val="#aggro"/>
  <enchant2 name="mpConsume" val="#ench2MpConsume"/>
  <enchant2 name="mpInitialConsume" val="#ench2MpConsume_Init"/>
  <for>
    <effect count="1" name="Buff" time="1200" val="0" stackOrder="1" stackType="berserk">
      <mul order="0x30" stat="mAtk" val="#mAtk"/>
      <mul order="0x30" stat="pAtk" val="#val"/>
      <mul order="0x30" stat="mDef" val="#mDef"/>
      <mul order="0x30" stat="pDef" val="#pDef"/>
      <mul order="0x30" stat="mAtkSpd" val="#val"/>
      <mul order="0x30" stat="pAtkSpd" val="#val"/>
      <add order="0x40" stat="runSpd" val="#runSpd"/>
      <sub order="0x40" stat="rEvas" val="#rEvas"/>
    </effect>

EU TO EDITANDO O LUGAR ERRADO? TENHO QUE MECHER NO NPC BUFF?

[Jondxz]

Em 14/09/2018 at 23:02, L2-T1T4N-Vini disse:

<table name="#mDef">0.8 0.80</table>
 <table name="#pDef">0.90 0.90</table>

 

[XxXTenTaCioN]

2 horas atrás, Jondxz disse:

 

Obrigado irmão TMJ!