Ir para conteúdo
  • Cadastre-se

[Tutorial] Criando Servidor de Lineage 2


Kelvin
Message added by Grundor

Atenção, esse tópico está desatualizado, use https://curso.l2jbrasil.com para um tutorial mais atualizado sobre como criar seu servidor de lineage 2.

Posts recomendados

  • L2JBr ADM

Donizildo você configurou os IPs errados...

Olhe onde tem na foto Internalhostname= Lá tá o teu NO-IP e não é pra colocar ele!

Coloque o seu IP interno lá! Depois Abra o arquivo l2.ini e coloque o seu ip interno lá também e tente logar!

Link para o comentário
Compartilhar em outros sites


coloca os ip pra min

oo no-ip e "lineage2extreme.no-ip.org"

por favor me ajuda

 

# ---------------------------------------------------------------------------
# DIFICULDADES EM CONFIGURAR ACESSE WWW.L2JBRASIL.COM
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------


# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from [url="http://www.whatismyip.com/"]http://www.whatismyip.com/[/url]. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
ExternalHostname = 5.152.212.244

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
InternalHostname = *

# Default: 127.0.0.1
LoginHost = 127.0.0.1

# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = *

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Uncomment the appropriate driver and url for the database you're using. If you don't know what this is... www.google.com
Driver = com.mysql.jdbc.Driver
#Driver = org.hsqldb.jdbcDriver
#Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
URL = jdbc:mysql://localhost/l2jdb
#URL = jdbc:hsqldb:hsql://localhost/l2jdb
#URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
#Database user info (using root user is not recommended)
Login = root
Password = 

# Default: 100
MaximumDbConnections = 100


# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# Default: 12
MinProtocolRevision = 70

# Default: 17
MaxProtocolRevision = 100


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------
# Character name template.
# Example: CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters, and any (capital or not) letter or number, like OmfgWTF1
# Most rational to have CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (as many of any symbols)
CnameTemplate = .*
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

 

 

:love_l2jbr:

terceirolugar.png

metas.jpg

(_)primeirolugar.png

(_)segundolugar.png

(X)terceirolugar.png

 

Link para o comentário
Compartilhar em outros sites

  • L2JBr ADM
# Default: *

ExternalHostname = lineage2extreme.no-ip.org

 

# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

InternalHostname = 127.0.0.1

 

Agora abra o l2.ini e ponha o iP 127.0.0.1 e logue

Link para o comentário
Compartilhar em outros sites

  • L2JBr ADM

Ai está para colocar online já papangu.

Você tera que fazer uma system com o L2.ini com o endereço do teu NO-IP e mandar pra galera.

Se ninguem conseguir logar ai você tera que liberar as portas do seu modem... ai é só dar uma googleadas que ensinam net a fora a abrir as portas dos modems.

Link para o comentário
Compartilhar em outros sites

Kelvin tem como eu faco a system?

 

me ensina

 

vlw!!!

 

todo Cliente vem com a sua normalmente encryptada vc consegue varias prontas pra uso Limpas sem custon na area de downloads e as com os custons nas proprias postagens das rev

Servidor Lineage II Sem Custom:

Clique aqui

Link para o comentário
Compartilhar em outros sites

  • L2JBr ADM

Delete arquivo options e tente logar, se nao conseguir va no navicat procure a tabela item e delete tudo que tiver la dentro.

Caso nao consiga logar ainda, cria outro char se tiver dando critico antes de escolher o char, reinstala o lineage.

Link para o comentário
Compartilhar em outros sites

  • L2JBr ADM

Né insistir não :P...

 

Desistala o MySQL, va em iniciar > executar digite msconfig va em serviços marque ocultar serviços microsoft se lá tiver MySQL e estiver marcado, desmarque!

 

Depois aperta OK vai pedir pra reiniciar nao reinicie, va na pasta do MySQL e apaguea.

 

Agora reinstale ele denovo que dara certo.

Link para o comentário
Compartilhar em outros sites

mais uma vez venho emcher o saco do senhor kelvin :D

fiz tudo só que esbarrei na parte de entrar no jogo depois da tela login antes de criar o personagem lá a mostra que o server barts ta online (light) mais quando eu clico em confirm não passa de lá eu acho que essa é a ultima vez que eu esbarro está quase pronto o server xD

:love_l2jbr:

Editado por James Ramalho
lineage2.png

Link para o comentário
Compartilhar em outros sites

  • L2JBr ADM

Ai deve ser problema de configuração de IP... mantenha os IPs do jeito que veio na rev.. e faça seu L2.ini com o IP 127.0.0.1 e logue...

Se logar parta para o proximo passo... configure no gameserver em externalhostname= o teu endereço NO-IP, faça uma system com o l2.ini configurado para o NO-IP e mande para alguem de fora tentar logar...

Link para o comentário
Compartilhar em outros sites

bom server criado criei o char e tals só que eu abro o navicat edito nick e tals na hora de colocar o access level não fixa não sei pq o meu server é gracia pt final e o level que eu coloco é igual a do video "100" eu não lembro se o level é diferente ou o que está avendo de errado, creio que est seja minha ultima duvida sobre como criar um server. :lol:

imagemeky.jpg

:semorre:

Editado por James Ramalho
lineage2.png

Link para o comentário
Compartilhar em outros sites

Alguem pode dizer qual o provavel motivo de não estar aparecendo o servidor pra eu entrar?

Tipo, eu abro o L2, coloco login, senha, dai qnd aparece a tela de escolher o servidor, simplesmente n tem nenhum pra eu escolher.

Ja registrei o server usando o RegisterGameServer.bat.

Link para o comentário
Compartilhar em outros sites

Poh vei, sou novato na parada, e to pagando pau feio pra configurar a server.prop....

se tiver como alguem me ajuda ar aew, add aew no msn ou manda email vlw

[email protected]

 

ahh... e to com duvida pra configurar a ini aki tb!!

vlw fuiz

Link para o comentário
Compartilhar em outros sites

  • Registre-se

    Faça parte da maior e  mais antigas comunidades sobre Lineage2 da América Latina.






×
×
  • Criar Novo...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.