No IP

**WellintonJF** · Novembro 16, 2012

FALA GALERA PODEM ME AJUDA JA SEGUI TODOS TUTO AKI E NADA DEU CERTO. NÃO CONSIGO COLOCAR ESSA REV ON PARA MEU AMIGO LOGAR DA CASA DELE SENDO QUE TINHA UM INTERLUDE QUE FUNCIONA NORMAL, SO COM ESSA REV QUE NÃO CONSIGO SE PUDER AJUDAR AGRADEÇO DE MAIS, SEGUE ABAIXO AS CONFIG

IP DO MEU PC E 10.100.10.13

NO IP: serverlordsofglory.servegame.com

Login Server

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# Bind ip of the LoginServer, use * to bind on all available IPs

# WARNING: Please don't change default IPs here if you don't know what are you doing!

# WARNING: External/Internal IPs are now inside "ipconfig.xml" file.

# Default: * (0.0.0.0)

LoginserverHostname = 10.100.10.13

# Default: 2106

LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs

# WARNING: Please don't change default IPs here if you don't know what are you doing!

# WARNING: External/Internal IPs are now inside "ipconfig.xml" file.

# Default: * (0.0.0.0)

LoginHostname = *

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

# ---------------------------------------------------------------------------

# Security

# ---------------------------------------------------------------------------

# Default: True

LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.

# Default: 10

LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.

# Default: 600 (10 minutes)

LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots

# Default: True

AcceptNewGameServer = True

# Flood Protection. All values are in MILISECONDS.

# Default: True

EnableFloodProtection = True

# Default: 15

FastConnectionLimit = 15

# Default: 700

NormalConnectionTime = 700

# Default: 350

FastConnectionTime = 350

# Default: 50

MaxConnectionPerIP = 50

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2js_ls (default)

# URL = jdbc:hsqldb:hsql://localhost/l2js_ls

# URL = jdbc:sqlserver://localhost/database = l2js_ls/user = sa/password =

URL = jdbc:mysql://localhost/l2how

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password =

# Default: 10

MaximumDbConnections = 10

# ---------------------------------------------------------------------------

# Misc.

# ---------------------------------------------------------------------------

# If False, the license (after the login) will not be shown.

# Default: False

ShowLicence = False

# Default: True

AutoCreateAccounts = True

# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

#DatapackRoot = C:/Work/tmp/DataPack

# ---------------------------------------------------------------------------

# Restart LS every 24 hours?

# ---------------------------------------------------------------------------

# Default: False, 24

LoginRestartSchedule = False

LoginRestartTime = 24

# ---------------------------------------------------------------------------

# Developer Settings

# ---------------------------------------------------------------------------

# Default: False

Debug = False

GAME SERVER

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# Where's the Login server this gameserver should connect to

# WARNING: Please don't change default IPs here if you don't know what are you doing!

# WARNING: External/Internal IPs are now inside "ipconfig.xml" file.

# Default: 127.0.0.1

LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014

# Bind address for gameserver. You should not need to change it in most cases.

# WARNING: Please don't change default IPs here if you don't know what are you doing!

# WARNING: External/Internal IPs are now inside "ipconfig.xml" file.

# Default: * (0.0.0.0)

GameserverHostname = 10.100.10.13

# Default: 7777

GameserverPort = 7777

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2js_gs (default)

# URL = jdbc:hsqldb:hsql://localhost/l2js_gs

# URL = jdbc:sqlserver://localhost/database = l2js_gs/user = sa/password =

URL = jdbc:mysql://localhost/l2how

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password =

# Default: 100

MaximumDbConnections = 100

# Cleans up the server database on startup.

# The bigger the database is, the longer it will take to clean up the database(the slower the server will start).

# Sometimes this ends up with 0 elements cleaned up, and a lot of wasted time on the server startup.

# If you want a faster server startup, set this to 'false', but its recommended to clean up the database from time to time.

# Default: True

DatabaseCleanUp = True

# The time before a database connection closes (in miliseconds)

# If a query takes longer to execute than the time defined here, the server will throw "Unclosed Connection!" error.

# If you get often this error message, try increasing this.

# Default: 60000ms

ConnectionCloseTime = 60000

# ---------------------------------------------------------------------------

# Misc Server Settings

# ---------------------------------------------------------------------------

# This is the server ID that the Game Server will request.

# Example: 1 = Bartz

# Default: 1

RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.

# Default: True

AcceptAlternateID = True

# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

# WARNING: If the specified path is invalid, it will lead to multiple errors!

# Default: .

DatapackRoot = .

# Define how many players are allowed to play simultaneously on your server.

# Default: 100

MaximumOnlineUsers = 100

# Numbers of protocol revisions that server allows to connect.

# Delimiter is ;

# WARNING: Changing the protocol revision may result in incompatible communication and many errors in game!

# Default: 267;268;271;273

AllowedProtocolRevisions = 267;268;271;273

# ---------------------------------------------------------------------------

# Misc Player Settings

# ---------------------------------------------------------------------------

# Character name template.

# Examples:

# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*

# The above setting will allow names with first capital letter, next three small letters,

# and any letter (case insensitive) or number, like OmfgWTF1

# CnameTemplate = [A-Z][a-z]*

# The above setting will allow names only of letters with first one capital, like Omfgwtf

# Default .* (allows any symbol)

CnameTemplate = .*

# This setting restricts names players can give to their pets.

# See CnameTemplate for details

PetNameTemplate = .*

# Maximum number of characters per account.

# Default: 7 (client limit)

CharMaxNumber = 7

IPCONFIG:

<?xml version="1.0" encoding="UTF-8"?>

<gameserver address="serverlordsofglory.servegame.com" xmlns:xsi="

O conteúdo está oculto, favor efetuar login ou se cadastrar!

xsi:noNamespaceSchemaLocation="IPConfig.xsd">

</gameserver>

**Pagedown** · Novembro 16, 2012

Ve Com Esse Tutorial se te ajuda um pouco a entender o esquema do no-ip

http://www.l2jbrasil.com/index.php?/topic/35809-colocando-servidor-on-com-no-ip-sem-erros/

**WellintonJF** · Novembro 16, 2012

ENTAO SEGUI ESSE TUTO MAIS DEU CERTO SOMENTE COM INTERLUDE COM O H5 NAO DEU CERTO POR ISSO POSTEI AS CONFIG QUE E DIFERENTE

Entrar

No IP

Pergunta

WellintonJF

Link para o comentário

Compartilhar em outros sites

2 respostass a esta questão

Posts recomendados

Pagedown

Link para o comentário

Compartilhar em outros sites

WellintonJF

Link para o comentário

Compartilhar em outros sites

Join the conversation

Anúncios

Quem Está Navegando

Posts

Navegação

Minhas Pesquisas

Atividades

Important Information